Prefixyr.com
Pakistan ☎️ Landline / Geographic

Area Code 718 – Sukkur

The phone area code for Sukkur is 718 (international format +92718). Browse local exchange codes (NXX) and carrier assignments below.

Current Local Time
04:31:19
UTC • UTC +00:00
Full Dialing Format
+92718
Population 5,538,555
👥
Admin Region Sindh
🗺️
Elevation 51m
🏔️
GPS Coordinates 27.1917, 69.2318
📍

📍 Geographic Location of Sukkur

Geographic Overview

The area code 718 is a geographic National Destination Code (NDC) assigned to the city of Sukkur and its surrounding administrative areas in the Sindh province of Pakistan. Sukkur is a major commercial and transit hub on the Indus River, serving as a gateway between northern and southern Pakistan. The code covers the city itself, along with nearby towns and rural areas that fall under the Sukkur District and parts of the Khairpur and Ghotki districts, depending on the local exchange boundaries.

Dialing Formats

When calling a fixed-line number in Sukkur from within Pakistan, the national trunk prefix 0 is used, followed by the area code and the subscriber number. The complete national format is: 0 718 XXX XXXX (where X represents the 7-digit local number). For example, a local Sukkur number might be dialed as 0718 1234567.

For international callers, the country code for Pakistan is +92, and the leading 0 of the trunk prefix is omitted. The international dialing format becomes: +92 718 XXX XXXX. Thus, the same number would be dialed as +92 718 1234567 from abroad.

Local and International Calling Instructions

  • Local calls within Sukkur: If you are calling from another fixed-line number within the same area code, you may only need to dial the 7-digit subscriber number, depending on the local exchange settings. However, for clarity and consistency, it is recommended to use the full national format, especially when calling from mobile networks.
  • Calls from other cities in Pakistan: Dial 0 718 followed by the subscriber number (e.g., 0718 1234567).
  • Calls from outside Pakistan: Dial your country's international access code (e.g., 00 from most countries, or 011 from the US/Canada), then 92, then 718, and finally the 7-digit subscriber number (e.g., 00 92 718 1234567).

Numbering and Overlay Considerations

As of the latest ITU-T E.164 national numbering plan for Pakistan, there are no overlay codes for the Sukkur area. The area code 718 is exclusively used for fixed-line (PSTN) services in this region. Subscriber numbers are typically 7 digits long, but some older lines may have fewer digits; in such cases, the national format may require padding or special dialing instructions from the local exchange. It is always best to confirm the exact number length with the local service provider.

Mobile numbers in Pakistan are non-geographic and begin with 03XX (e.g., 0300, 0321), so they are not affected by this area code. When dialing a Sukkur fixed-line number from a mobile phone, the same national format (0718...) applies.

❓ Frequently Asked Questions

Which city does the area code 718 belong to in Pakistan?
The area code 718 is assigned to Sukkur, a city in the Sindh province of Pakistan. It covers Sukkur and its surrounding areas.
How do I call a Sukkur landline from abroad?
To call a Sukkur landline from abroad, dial your country's international access code (e.g., 00 or 011), then Pakistan's country code 92, then the area code 718 (without the leading 0), and finally the 7-digit local number. For example: +92 718 1234567.
Do I need to dial the area code when calling within Sukkur?
For local calls within Sukkur, you may be able to dial just the 7-digit subscriber number if you are on a fixed line. However, from mobile phones or for clarity, it is recommended to dial the full national format: 0718 followed by the number.
Is 718 a mobile or fixed-line prefix?
718 is a geographic area code for fixed-line (PSTN) services in Sukkur. Mobile numbers in Pakistan have non-geographic prefixes starting with 03, such as 0300 or 0321.
Are there any new area codes overlaying 718 in Sukkur?
As of the latest numbering plan, there are no overlay codes for the Sukkur area. The 718 code remains the sole geographic code for fixed-line services in that region.