Prefixyr.com
Pakistan ☎️ Landline / Geographic

Area Code 477 – Jhang

The phone area code for Jhang is 477 (international format +92477). Browse local exchange codes (NXX) and carrier assignments below.

Current Local Time
06:54:31
UTC • UTC +00:00
Full Dialing Format
+92477
Population 127,333,305
👥
Admin Region Punjab
🗺️
Elevation 461m
🏔️
GPS Coordinates 33.6748, 72.6970
📍

📍 Geographic Location of Jhang

Geographic Overview

The area code 477 is a geographic National Destination Code (NDC) assigned to the city of Jhang, located in the Punjab province of Pakistan. Jhang is a major agricultural and industrial hub situated in the central part of the province, approximately 180 kilometers southwest of Lahore. The code covers the administrative district of Jhang, including its urban centers and surrounding rural areas. As a geographic code, it is used exclusively for fixed-line (PSTN) services within this region.

Dialing Formats

When calling a Jhang landline from within Pakistan, the national trunk prefix 0 is used before the area code, followed by the subscriber number. The national format is: 0 477 XXX XXXX (where X represents the local subscriber digits). For example, a local number might be dialed as 0477 123 4567 from any other part of Pakistan.

For international callers, the country code for Pakistan is +92, and the leading trunk prefix '0' is dropped. The international format becomes: +92 477 XXX XXXX. An example would be +92 477 123 4567 when calling from abroad.

Caller Instructions

  • Local callers within Jhang: For calls within the same area code, it is often possible to dial only the 7-digit subscriber number (without the area code), depending on the local exchange configuration. However, to avoid confusion, it is recommended to use the full national format.
  • Domestic callers from other cities: Dial 0 477 followed by the subscriber number.
  • International callers: Dial your country's international access code (e.g., 00 or 011), then 92 477, and the subscriber number.

Regulatory and Technical Notes

The Pakistan Telecommunication Authority (PTA) oversees the allocation of geographic NDCs. The 477 code is part of the national numbering plan that adheres to ITU-T E.164 recommendations. Subscriber numbers within the 477 area are typically 7 digits long, resulting in a total national significant number (NSN) length of 10 digits (including the NDC) when the leading '0' is excluded. This structure ensures efficient routing and interoperability across the PSTN and with mobile networks.

As with many geographic codes in Pakistan, there is no overlay code currently assigned for Jhang; the 477 code remains the sole geographic identifier for the district. Fixed-line services in this area are provided by the state-owned Pakistan Telecommunication Company Limited (PTCL) and various licensed operators, all of which use the same NDC.

For businesses and individuals, it is essential to use the correct international format when communicating with overseas contacts to avoid misdialing. Always verify the complete number, including the subscriber portion, before placing a call.

❓ Frequently Asked Questions

What is the area code for Jhang, Pakistan?
The area code for Jhang is 477. When dialing from within Pakistan, use 0 477 before the subscriber number. From abroad, dial +92 477 followed by the number.
How do I call a Jhang landline from the United States?
From the US, dial the international access code 011, then Pakistan's country code 92, then the area code 477, and the local subscriber number. For example: 011 92 477 123 4567.
Is the 477 area code only for landlines?
Yes, 477 is a geographic area code assigned to fixed-line (PSTN) services in the Jhang district. Mobile numbers in Pakistan use non-geographic prefixes like 3XX, and are not tied to a specific city.
How many digits are in a Jhang local phone number?
A Jhang local landline number typically consists of 7 digits after the area code. The full national format is 0 477 XXX XXXX, and the international format is +92 477 XXX XXXX.
Can I dial a Jhang number without the area code if I am calling from within Jhang?
In many cases, local calls within the same area code can be made by dialing only the 7-digit subscriber number. However, for reliability, it is recommended to always use the full national format, especially when calling from mobile phones or different exchanges.