Prefixyr.com
Austria ☎️ Landline / Geographic

Area Code 5447 – Flirsch

The phone area code for Flirsch is 5447 (international format +435447). Browse local exchange codes (NXX) and carrier assignments below.

Current Local Time
12:14:32
UTC • UTC +00:00
Full Dialing Format
+435447
Population 990
👥
Admin Region Tyrol
🗺️
Elevation 1176m
🏔️
GPS Coordinates 47.1500, 10.4000
📍

📍 Geographic Location of Flirsch

Overview of Area Code 5447

Austrian area code 5447 is a geographic National Destination Code (NDC) assigned to the western Tyrolean municipality of Flirsch and its immediate surroundings. Located in the Landeck District of the state of Tyrol (Tirol), this numbering area follows the ITU-T E.164 standard for the Austrian public switched telephone network (PSTN). The code is administered by the Austrian Regulatory Authority for Broadcasting and Telecommunications (RTR-GmbH) under the national numbering plan.

Geographic Coverage and Administrative Jurisdiction

The 5447 prefix serves the village of Flirsch, situated in the Stanzer Valley (Stanzertal) along the River Sanna, at an elevation of approximately 1,150 meters. The exchange area encompasses the cadastral municipality of Flirsch, which is part of the political district of Landeck. While the primary population center is Flirsch itself, the numbering area may also include nearby hamlets and isolated farms that are connected to the local exchange. The region is characterized by its alpine landscape and proximity to the Arlberg massif, making it a popular base for winter sports and summer tourism.

Dialing Formats and Caller Instructions

For callers within Austria, the area code is dialed with a leading 0, followed by the subscriber number. The complete national format is: 0 5447 xxxxx. For example, a local Flirsch number such as 65432 would be dialed as 05447 65432 from any other part of Austria. When calling from abroad, the country code for Austria (+43) replaces the trunk prefix, and the area code is used without the leading zero. Thus, the international format becomes: +43 5447 xxxxx. For instance, the same number would be dialed as +43 5447 65432 from outside Austria. Note that the subscriber number length in this area is typically between 4 and 6 digits, depending on the specific line configuration.

Overlay and Numbering Plan Considerations

As of the current numbering plan, there is no overlay code for the 5447 area. The code is exclusive to the Flirsch exchange, and no other geographic area shares this NDC. This means that local calls within the Flirsch area can be made using only the subscriber number, without the area code, when dialing from a landline within the same local network. However, for clarity and to avoid misdialing, it is recommended to use the full national format even for local calls, especially when calling from mobile phones. Mobile numbers in Austria are non-geographic and begin with prefixes such as 0664, 0676, 0699, etc., and are not affected by this area code.

Practical Usage and Future Outlook

For businesses and residents in Flirsch, the 5447 code is an integral part of their identity, often used in marketing materials to signal local presence. With the ongoing migration toward VoIP and IP-based telephony, geographic numbers like 5447 can be used over any broadband connection, but the number remains tied to the Flirsch area for regulatory and emergency services purposes. When dialing from a mobile phone within Austria, the area code is always required, even if you are physically in Flirsch. For international callers, it is essential to use the +43 country code and omit the leading zero of the area code. As Austria's numbering plan evolves, no changes to the 5447 code are currently anticipated, ensuring stability for subscribers.

❓ Frequently Asked Questions

Which region does the Austrian area code 5447 cover?
Area code 5447 covers the municipality of Flirsch and its immediate surroundings in the Landeck District of Tyrol, Austria. It is a geographic code assigned to the local PSTN exchange.
How do I call a Flirsch number from abroad?
To call a Flirsch number from abroad, dial the international access prefix (e.g., 00 from most countries), then Austria's country code +43, followed by the area code 5447 without the leading zero, and the subscriber number. For example, +43 5447 65432.
Do I need to dial the area code when calling from a mobile phone within Austria?
Yes, when calling a fixed line in Flirsch from a mobile phone in Austria, you must dial the full national number including the area code with a leading zero, such as 05447 65432. Mobile numbers are non-geographic and require the area code for any fixed-line destination.
Is there an overlay code for area 5447?
No, there is no overlay code for area 5447. The code is used exclusively for the Flirsch exchange, and no other area shares this NDC. This means that local calls within Flirsch can be made using only the subscriber number when dialing from a landline in the same local area.
Can I use a 5447 number for VoIP services?
Yes, geographic numbers like 5447 can be used with VoIP services, allowing you to keep a local Flirsch number even if you move to another location. However, the number remains associated with the Flirsch area for administrative and emergency routing purposes.