Prefixyr.com
Austria ☎️ Landline / Geographic

Area Code 2942 – Retz

The phone area code for Retz is 2942 (international format +432942). Browse local exchange codes (NXX) and carrier assignments below.

Current Local Time
05:40:37
UTC • UTC +00:00
Full Dialing Format
+432942
Population 4,331
👥
Admin Region Lower Austria
🗺️
Elevation 229m
🏔️
GPS Coordinates 48.7494, 15.9624
📍

📍 Geographic Location of Retz

Overview of Area Code 2942 (Retz, Austria)

Austria's area code 2942 is a geographic National Destination Code (NDC) assigned to the town of Retz and its surrounding administrative district in the northeastern part of Lower Austria (Bundesland Niederösterreich). This code falls within the Austrian public switched telephone network (PSTN) and is used for fixed-line services. The region is known for its historical old town and is situated near the Czech border, approximately 70 kilometers north of Vienna.

Geographic Coverage and Jurisdiction

The 2942 area code serves the municipality of Retz and several adjacent communities, including but not limited to Zellerndorf, Pulkau, and Hardegg. These localities are part of the Hollabrunn District in Lower Austria. The administrative responsibility for numbering lies with the Austrian Regulatory Authority for Broadcasting and Telecommunications (RTR-GmbH), which allocates geographic codes based on the traditional telephony exchange areas.

Dialing Formats and Instructions

To call a fixed-line number in Retz, you must follow the appropriate dialing sequence depending on your location:

  • International call from abroad: Dial the international access prefix (e.g., 00 from most countries, or + from mobile), followed by Austria's country code 43, then the area code without the leading zero (2942), and finally the local subscriber number. Example: +43 2942 12345.
  • Domestic call within Austria: Dial the trunk prefix 0, then the area code 2942, followed by the local number. Example: 0 2942 12345.
  • Local call within the same exchange: In many Austrian fixed-line networks, local calls can be made by dialing only the subscriber number (without the area code). However, this depends on the specific network configuration and may not be available in all areas. For clarity, always use the full national format when in doubt.

Subscriber numbers in the 2942 area typically consist of 4 to 6 digits, resulting in a total national significant number (NSN) length of 9 to 11 digits when including the country code and area code.

Overlay and Numbering Considerations

As of the latest updates, there is no overlay code for the 2942 area. This means that the area code is unique to the Retz region, and no additional area codes have been introduced for the same geographic area. Consequently, ten-digit dialing (including the area code) is not mandatory for local calls, but it is recommended for consistency and to avoid misdialing when calling from mobile networks.

Caller Instructions

  • For callers from Austria: Always include the trunk prefix 0 when dialing from a different area code. For example, from Vienna, you would dial 0 2942 12345.
  • For international callers: Omit the leading zero and use +43 or the international access code. Example: +43 2942 12345.
  • For mobile callers: When calling a fixed line in Retz from a mobile phone, dial the full national number including the area code, as mobile networks do not support abbreviated local dialing.

Always verify the subscriber number length with your contact, as numbers may vary. For further assistance, consult your service provider or the official Austrian numbering plan.

❓ Frequently Asked Questions

Which region does Austria area code 2942 cover?
Area code 2942 covers the town of Retz and its surrounding communities in Lower Austria, near the Czech border.
How do I call a number in Retz, Austria from the United States?
Dial the US international prefix 011, then Austria's country code 43, then the area code 2942 (without the leading zero), and finally the local number. For example: 011 43 2942 12345.
Do I need to dial the area code for local calls within Retz?
In many fixed-line networks, local calls within the same exchange can be made using only the subscriber number. However, it is safer to dial the full number including the area code (0 2942) to ensure connectivity.
Is area code 2942 used for mobile numbers?
No, 2942 is a geographic area code assigned to fixed-line services. Mobile numbers in Austria have their own non-geographic prefixes starting with 6.
What is the correct international format for a Retz number?
The correct international format is +43 2942 followed by the local subscriber number, omitting the leading zero of the area code. For example: +43 2942 12345.